At the outset of this article I'd just like to say please watch the video below that accompanies this piece, we should all try and avoid turning our carp rigs into death traps like the one below.
Example of a carp death rig
I was out carp fishing last week and I had a cracking day, I was on the fish and despite the high pressure conditions they were happy to feed. During the day I had a run and played a carp in to the net, I wasn't aware there was a problem until my lead and carp rig appeared with a ball of fishing line and the carp attached to another rig just a foot or two behind mine.
The carp was attached to a death rig, fortunately I was able to land the fish and free it from the potential death trap it was trailing.
The carp rig in question was an inline lead setup, my favourite carp rig by a mile and one I've landed thousands of carp on. I was saddened to see the angler who'd tied the rig had pinched a lead shot behind the tubing to make sure it was down on the deck. I couldn't believe what I was seeing, an inline lead system requires there to be nothing above the tubing, it needs to be free so the line can pull through the tubing and the lead and rig tubing can be dumped. Clearly if you pinch a lead shot behind the rig tubing it's not going to drop the lead.
I couldn't believe an angler could be so stupid as to do this yet here it was in front of me. I was so unhappy looking at the way this carp rig had been set up I decided to film the video that's in this article and write a piece to say please don't put any kind of lead shot on your line above rig tubing. If you need to pin your line down there are several types of backlead available, standard Sliding Backleads, Captive Back Leads and Flying Backleads. A flying backlead is the only type of lead that should be on your line above the rig, like the lead and rig tubing, a flying backlead will slide off your fishing line in the event of a break as will a sliding backlead.
A shocking carp death rig
It's so easy to turn a safe carp rig into a death rig, just one lead shot pinched on the line is enough with an inline lead system and I hope I've drawn your attention to this issue and made you think about what happens to your carp rigs and the carp in the event of a line breakage?. You should ask yourself if the lead weight will drop so the carp isn't swimming round with it, test your rig to make sure it's safe and if you see anyone pinching lead shot above their rig tubing please have a word with them and point them in the right direction, it may just save a carp's life.
Spodding has become a common practice in carp fishing over the last 20 years, it's generally accepted that a braided main line is best for spodding because it's very thin and you can cast a long way with it but you need to use a heavier braided shock leader in order to take the weight of your spod or spomb on the cast.
The fishing knot that the majority of carp anglers use for their spodding set up these days is the back to back grinner knot so if you've an interest in using a spod or spomb in your carp fishing then this is the spod leader knot you should use.
Spod Leader Knot (click to watch)
The back to back grinner knot is ideal for joining two different breaking strain braids together, the shock leader should be roughly 3 rod lengths long and 50lb in breaking strain with 20lb braid for the main line.
Take one end of the 50lb shock leader braid and form a loop holding the braid between your thumb and forefinger. Lay the 20lb braided main line over it too so you are holding both braids between thumb and forefinger and leave a decent sized tag on both sides for tying the two sides of the knot.
Form a loop in the 50lb leader braid
Wrap the 50lb braid around both lines as if you're doing an overhand knot, go through the loop 5 times and then tighten the knot down lightly.
Wrap around the loop 5 times and tighten down
Turn the two lines around and form a loop in the 20lb braid you're using for the main line and repeat, put the 20lb braid tag through the loop 5 times and tighten down lightly.
Turn the line around and do the same with the 20lb braid
At this point you should have two knots back to back and it's just a case of pulling both lines so the knots bed together 'back to back', this is the back to back grinner knot and it makes an excellent spod leader knot for your spodding setup. Tie your spod or spomb to the other end of your 3 rod length long 50lb braided shock leader and you're good to go.
With both knots tightened down pull them together to form your back to back grinner knot
If these instructions leave you in any doubt about how to tie this spod leader knot please check out the video above in this article, you can't beat actually seeing a fishing knot being tied.
Tiger nuts are a great bait for carp fishing but how do you present them to the fish?, in this article we'll take a look at my favourite tiger nut carp rig.
Tiger Nut Carp Rig
There are a few rigs you can use for tiger nuts but my favourite is the easy to tie carp rig which utilises a knotless knot, my tiger nut carp rig is just 8-10 inches of ESP Sink Link Braid, a Kamasan B175 Hook and a knotless knot. This is fished with a basic inline lead setup.
To present a tiger nut on this rig I use a 6mm ESP Nut Drill and a 6mm cork stick that's cut to size. Simply take a decent sized tiger nut either from the tin you've bought or from the tiger nuts you've prepared yourself. The nut drill has a small notch sticking out and you should locate this notch against the middle of the tiger nut and push it into the nut.
The nut drill has a notch to help drilling out the tiger nut
With the notch from the nut drill located, it will guide the drill as you apply pressure and begin to core out the tiger nut. By twisting the drill and applying gentle pressure whilst holding the nut still you can bore out the middle of the tiger nut, you should do this until the nut drill has gone right through the nut, carry on twisting the drill as you remove it from the tiger nut and you should be left with a nut that has a perfect 6mm hole right through it.
Core out the middle of the tiger nut
With the hole drilled take a 50mm x 6mm cork stick and push the cork into the hole, it should fit snugly and if you find it difficult to push in, twist the cork stick as you push it into the tiger nut. Once flush with the other side of the tiger nut take a pair of braid scissors and cut the cork stick flush with the tiger nut on the other side as well.
With the hole drilled insert a cork stick and trim flush with the tiger nut
The cork stick through the middle should turn the tiger nut hookbait into a wafter, use a hair needle to put the tiger nut onto the rig, you should go through the cork in the middle when you hair rig your tiger nut hookbait and it goes on the rig just like a boilie would.
That's my favourite tiger nut carp rig complete, just fish the tiger nut wafter style with a handful of free offerings around the rig and I promise it will be very very effective at catching carp.
Perfect Tiger Nut Wafter Rig
Below is a video on how to tie my easy to tie carp rig to use with tiger nuts, also below is the inline lead setup I use with the rig and how to prepare tiger nuts for carp fishing if you ever want to do them yourself, it's certainly a lot cheaper than buying tins of tiger nuts from the tackle shop.
Spooling a carp reel isn’t a difficult thing to do but if you don’t get it right you can quite often end up with line twist, there is a way to get your mono onto the spool and avoid line twist so let’s take a look at how to spool a carp reel.
How to spool a carp reel
If you have new carp reels that have never been spooled before then spooling your carp reel is quite straight forward, for this article let’s assume there is old line on the spool that has to be removed. I’ve seen some anglers use a drill to remove line from a spool but I’m not a fan and I prefer to do mine the old fashioned way. I simply prop my rod up against the wall, open the bail arm of the reel and just wind the line round my hand until it’s all off, it’s a little time consuming but once it’s done I tie the line off so it won’t spring into a big old mess and simply dispose of it in the bin.
Removing old fishing line from a reel
With the old line removed my backing line is exposed, I have enough backing line on my spools so that I only need 200 yards of mono to fill my spool to the lip. If you have new reels I’d highly recommend putting backing line on them or use spool/line reducers if you have them. It saves a lot of waste and with 200 yards of mono on each carp reel I can spool 2 or 3 carp reels more than once from the same 1000 yard spool of mono.
Spool the reel with backing line first
To spool your carp reel with mono, use the butt section of your rod, I thread my Line through the butt eye, open the bail arm on the reel and tie the mono to the reel making sure that the knot is at the back of the spool. You can use any knot you want for this and I usually use a couple of plain granny knots. You should never lose all your mono off the spool so technically as long as it’s tied on you should have no problem whatever knot you use, hence why I stick to a plain granny knot.
With the line tied to the spool, close the bail arm and put a few turns onto the reel. Before you start winding your line onto the spool make sure your spool of mono is on the floor with the label facing upwards, the mono should come off the spool in an anti-clockwise direction, this is really important, if the line comes off the spool in a clockwise direction you’ll get a lot of line twist so always have the label facing upwards and the line leaving your spool of mono anti-clockwise. Once I’ve made a start I like to use a towel or tea towel, I wind the mono through the towel and onto the spool, this does two things, it makes sure the mono is clean as it goes onto the spool and it stops you getting friction burns, if you wind mono onto a reel under tension and you do it quickly you’ll burn your fingers without the towel so it’s better to use one than not.
Once you’re set up just keep the butt eye of the rod above the spool of line so as it coils off anti-clockwise it rises vertically to the butt eye then down onto your reel spool, fill the reel spool right to the lip if you’re using Mono and just under the lip if you’re using braid.
Once you’ve filled your reel to the lip you’re done, just cut the mono and you can either finish tackling up your rod or you can clip the mono into the line clip on the spool of the reel until such time as you need it.
Spool a carp reel right to the lip of the spool
And that’s how to spool a carp reel, if you struggle to follow this article please check out the video above, sometimes watching it done is easier than written instructions and the 5 minute video is easy to follow. You should consider subscribing to my youtube channel too, like this blog, it’s full of carp fishing tips to help you put more fish on the bank and it's all free, I'll never charge for my content.
I like margin fishing for carp and line concealment is really important, I use a combination of slack lines and a lead free leader to make sure there are no lines running through my swim especially at the business end of my carp rig.
How to Splice a Lead Free Leader for Carp Fishing (click below to watch)
There are a few companies who sell lead free leaders, fox seem to be the most popular with their Camo Submerge Leader. I had a lot of difficulty getting hold of the submerge leader, it was always sold out so I ended up buying the PB Products Silk Ray which is just a different companies lead free leader and to be honest, one lead free leader is pretty much the same as another.
When it comes to splicing a lead free leader I like the ESP Splicing Needles, they are quite thin and delicate for a splicing needle but they do the job really well and you do get 3 in a packet, which is useful if you happen to bend or break one.
To splice a lead free leader I go into the leader about 6 inches from the end, once you’re in turn the splicing needle round 180 degrees and push the splicing needle up through the centre of the lead free leader, you should be heading towards the end of the leader, the 180 rotation is because of the hook on the splicing needle. If you accidently come out of the wall of the lead free leader too early, just close the gate on the splicing needle, pull it out of the leader and start again, it takes a bit of practice to get it right. Continue pushing the splicing needle up through the centre of the lead free leader making sure to cover the whole of the splicing needle, the splice you make should be a nice long one so it won’t come undone.
Use the whole length of the splicing needle for a long and strong splice
Once you’ve gone the whole length of the splicing needle, push the needle out through the wall of the lead free leader, hook the very end of the leader, close the gate on the splicing needle and carefully draw it back through the centre of the lead free leader. Because you started 6 inches from the end you should have plenty of leader to be able to adjust the size of the loop you’ve just spliced. Draw the loop down and trim the excess with a pair of Braid Scissors, at this point your splice is complete.
Splice both ends to create a looped lead free leader
You can make a looped lead free leader any length you want, all you have to do is splice both ends of the leader. I find these lead free leaders quite useful for pinning my line down when margin fishing for carp and for pva bag fishing, you can make up your pva bags in advance and simply loop them onto your main line which is a great time saver when you’re on the bank fishing.
Tight Lines.
Mark.
Inline leads are great for carp rigs, they are my favourite type of carp lead and they lend themselves very well to my simple carp rig, a carp rig that’s caught me stacks of carp over the years so let’s take a look at how to set up an inline lead for carp fishing.
How to Set Up an Inline Lead for Carp Fishing, click below to watch
Setting up an inline lead starts with Rig Tubing and there are a couple of considerations, the rig tubing should be longer that the hook length and it should be dry. Rig tubing longer than the hook length prevents tangles and dry rig tubing is so much easier to thread. If you’re on a session and changing a rig you should never try and thread the same piece of rig tubing you've been using, use a new and dry piece and you’ll find it will thread much easier than your current wet piece.
Another trick for making rig tubing easier to thread is to snip your line at 45 degrees and thread it with the rig tubing hanging down so gravity assists. If you snip your line, thread downwards and have dry rig tubing you will never have any trouble threading a piece of rig tubing onto your line.
Once you’ve threaded your rig tubing you should add a Tail Rubber, thread the tail rubber onto your main line thin end first then gently push the tail rubber onto the tubing, I find twisting the tail rubber one way and the rig tubing the other helps at this point and you should be able to get them both together easily.
Next you thread on your Inline Lead, thread your line through from the back of the lead so the lead insert sits against the thick end of the tail rubber. Again you can twist the tail rubber as you push it onto the insert. You should push the tail rubber all the way on so it sits against the back of your inline lead.
Inline lead, tail rubber and tubing all set up
To finish your inline lead set up you should tie your carp rig to your main line and your carp rig should be made with a standard Size 8 Swivel which should then fit neatly in the housing of your inline lead. At this point I like to take a pair of pliers and slightly crush the back of the size 8 swivel so it’s slightly oval shaped rather than round. Modifying the swivel in this way makes the rig safer.
Inline lead mould bar is sized for a standard size 8 swivel
To test your inline lead set up you should hold up the rig, if the set up is safe then the lead will fall away from the swivel under it’s own weight. At the most it shouldn’t take more than one shake to release the lead from the swivel. Once you’ve achieved this the rig is complete and ready to go.
Gently squeeze the back of the swivel to make a safe carp rig
Check out the video above to see how to set up an inline lead for carp fishing and if you’re interested in the carp rig itself then check out this great video below called easy to tie carp rigs for beginners, it covers making the rig, adjusting the rig to get the best hook holds and how to keep the rig from tangling, below that is a video on how to tie the grinner knot which is also used to tie the main line to your size 8 swivel, all the videos are well worth watching.
Tight Lines.
Mark.
Dropping the lead in carp fishing is a controversial subject, should you drop the lead and if so, when?.
Recently there has been some terrible advice from tackle companies advising carp anglers to drop the lead all the time. Whilst dropping the lead can be helpful in some circumstances most of the time it’s just not necessary. I view this tackle company advice as a cynical attempt to sell more leads and inline safety rig kits. The inline safety rig kits are £4.99 at the time of writing and the ‘special lead weights’ are starting at around £1.50 each. You can clearly see why it’s beneficial to a tackle company to have you dropping leads, it’s the perfect way to transfer your cash into their pockets!.
Dropping the lead in carp fishing (click to watch)
Unless you’re fishing a very weedy or very snaggy water and losing a lot of fish you don’t need to drop the lead at all, dropping the lead is a tactic for weed and snags. When you drop the lead you get rid of downward pressure on the carp during the fight and they come to the surface quickly with no lead in the setup trying to sink. It’s getting the carp to the surface and away from snags and weed that allows you to land them and not lose them, it’s a really good tactic but only in those circumstances.
Regarding leads, they are expensive but you can get them cheaper. If you go onto a reputable fishing group on facebook like the North West & Cheshire Angling group and ask where anglers are getting their carp leads from you’ll get a whole host of answers giving you the names of local lead makers who charge 50p-60p each for a lead, that’s just one third of the cost of a tackle company and I’d advise my fellow carp anglers to make use of your local lead maker. You will have to buy in bulk though, at least 10-15 leads at a time. You can also make your own carp leads, Lead Moulds start at under £20 these days and making them yourself is something that’s easy to get started with, it’s a bit of a dirty job though and not for everyone.
How to drop the lead in carp fishing, tie your line to the same side of the swivel
All you need to drop the lead in carp fishing is an inline lead, no inline safety rig kit is necessary and dropping the lead is simply a case of sliding the tail rubber back onto your rig tubing or leadcore leader, snipping the main line at the swivel and then tying it to the same side of the swivel your hooklink is on. Doing this prepares the inline lead for drop off style fishing. Push the end of the swivel into the lead housing and then push the tail rubber onto the end of the lead and tighten it all down nicely. This should leave you with the lead in place but the rig tubing / leadcore and line will be running around the outside of the lead and not through the middle. Under pressure the tail rubber pops off and the lead will separate from the swivel and drop to the lake bed leaving you attached to the carp. It’s a simple system that really doesn’t require the ‘tackle company’ approach that’s far more costly for you. Check out the video above to see how it’s done.
Inline safety carp rig set up for dropping the lead
To sum up, only drop the lead in carp fishing if you’re losing a number of carp to snags or weed, if you don’t need to drop the lead then don’t do it. Make your own carp leads or buy them cheap from a local lead maker and drop the lead the old school way so you don’t incur any extra costs for rig bits you don’t need.
Tight Lines.
Mark.
In 1991 I got made redundant, at the time my payout was quite good, I had enough to upgrade my sun lounger to a fox super deluxe bedchair and I bought a fox supa bivvy, that left me with enough money to tax and insure my car for a fair few years and some backup cash to see me through. I also bought a season ticket for burton mere which was my local carp water. That makes 1992 a perfect year to analyse because I just fished all of it!.
Carp Fishing Tips - Carp Season Analysis (click below to watch)
January
I only caught 1 carp caught in January, a 9lb 6oz mirror, winter is a hard and my first carp fishing tip is not to start on a new water in January, it’s a tough time of year and the chances are you’ll struggle. I certainly did and I had a few blanks throughout the month. Every year I see people joining one of the clubs I’m in, prince albert angling society, they’re so excited it’s like getting a golden ticket but the carp fishing is tough and many end up disappointed with the club, believe me the carp fishing is best left until late march when the clocks change.
9lb 6oz Carp Fishing Tips for Winter, don't start a winter campaign in January!
February
3 carp caught in February, funnily enough they all came from the same spot at the same time of day. My carp fishing bible is the book Carp Fever by Kevin Maddocks. The location section of this book is superb and every carp angler should read it. In it Kevin spoke of carp turning up in a certain place at a certain time of day like clockwork and if you found one of these spots you could move in there an hour or so before, set your trap, get a quick result then move on quickly with your bonus fish. I’d found one of these spots and all 3 fish came from a reedbed at 13.05pm. We had some fun with this, on the third fish I stopped my mate mid-sentence, tapped my watch and said excuse me Phil, my left hand rod is going to go in the next 30 seconds and I started walking over to the rods, no sooner had I got there when the left hand rod pulled up. The look on Phil’s face was a picture and he just didn’t get it, once I’d explained the carp turning up at exactly the same time he got it. The next weekend I turned up to find Phil sitting in my swim tapping his watch which brings me to another important carp tip, keep your detailed info to yourself!. It’s ok sharing captures from waters but the inner workings of how your captures come about and the secrets you uncover you should definitely keep to yourself, if anyone asks just put it down to good luck!. Phil played the same trick on another angler, he stopped him mid-sentence and right on cue his rod went off, we told the guy all good carp anglers know how to use ‘the force’….lol. Seriously though, understanding carp movements around the lake has been a cornerstone of my carp fishing since I started, KM was absolutely right and as a hunter, knowing where your prey is going to be at a specific time is golden information and it makes ambushing them really easy.
Carp Fishing Tips, bite time really matters!
March
I caught 6 fish in March, double the February total. March is a great month, the temps are creeping into low double figures and the amount of daylight we get is increasing and I think that’s what gets the carp moving out of their winter holding areas, once the clocks change it’s definitely carp fishing time.
Carp Fishing Tips, wait until the clocks change!
April
April is a great month for carp fishing, one of the best of the year in fact. The carp are moving round again after winter and looking for food. I caught 16 carp in April, a very good total, in fact I was catching so many fish people were starting to talk and I found I could never get back in a swim I’d caught well from, all eyes were on me and my bait!. I was rolling my own boilies at the time, a 50/50 mix of Haiths red factor bird food and semolina, to 6 eggs I was adding 30ml of olive oil for fat content, 2ml of intense sweetener for taste and 3ml of strawberry flavour. Another one of my carp tips is your flavours. It’s not so much the flavour you use but the solvent on which it’s based. I’d been using a Richworth’s strawberry flavour which was based on propylene glycol or PG as it’s known. The lake owner was selling Richworth readymades so it was logical that PG was the flavour the carp were used too. Whilst using the PG flavour I was introducing another strawberry flavour, strawberry Nutrafruit from Nutrabaits which was a flavour based on glycerol, two strawberry flavours but completely different. I let anglers break up my bait and smell them, Richworth strawberry I always answered and off they’d go to the hut. Because it had been in use for years the PG wasn’t that good and Nutrabaits hadn’t been going long so the lake hadn’t seen any glycerol flavours yet. I’ d been baiting up with the new strawberry bait whilst fishing with the old one, that was until April when I switched. All hell broke loose when I did, my bobbins were just flying and I’d never experienced anything like it. I’d been reading Geoff Kemp and his comments on flavour bases and my own results confirmed he was right on the money about the base solvent of a flavour. Pick yours well, there aren’t that many of them and what’s been used before on a lake really matters!.
Carp Fishing Tips, the flavour of your bait matters!
May
I rate may as the best month of the year and another 17 carp fell during this month, the fishing was frantic to say the least, it was run after run after run. The carp are well active during this month and it’s the month you’ll see the most captures as the fish feed up ahead of spawning, it’s also the month the carp are at their heaviest weights before they spawn. This leads me to another one of my carp fishing tips, May is the best month to hit a day ticket water. I’m always looking at getting value for money from my fishing, let’s face it, day ticket carp prices are a bit of a rip off and I want to tip the odds of a result in my favour if I’m going to have to pay a premium day ticket rate for my fishing. Many years ago I decided to sack day tickets off and these days I do one trip a year to a premier day ticket carp water and it’s always in May because it’s the month you’ll catch the most fish.
Carp Fishing Tips, May is the best month of the year for carp fishing
June
June was an incredible month with 27 carp landed. There is an old saying about lies, damn lies and statistics. Whilst June was the best month of the year it was greatly exaggerated by one particular session when I caught 16 fish in a day off the top. Without that result I would have only landed 11 carp. That one result brings me to the next of my carp fishing tips, floater fishing. The 16 carp all fell to the beach caster rig. At the time the beach caster rig wasn’t popular and was still very much limited to those in the know. I was first to use the rig on burton mere and the results I had with it were incredible. The carp just didn’t know what hit them. The beach caster still isn’t that popular today and some waters have even banned it because it can kill the floater fishing on a water. If you can use it, it can be a deadly method on the day. This brings me to another of my carp fishing tips, know what’s been used in the past so you can decide the best tactics and baits to use in the future. It pays to do your research, if you’re the first angler to use a new of forgotten bait or method the fish aren’t used too then you’ll catch an awful lot of carp. This is why this blog and youtube channel is focused more on being different and not following what I call the Ronnie rig crowd.
Carp Fishing Tips, new methods the carp haven't seen can be devastating
July
I caught 15 carp in July. July is another good month, the days are long and the temperatures are high, a great time to be on the bank comfort wise. The floater fishing is often good and a few of my fish came off the top in this month. The carp are still not at their top weights though, they spawn usually in late May, sometimes early June, then they can take a good few months to come back into decent condition. They are hungry at this time of year but the fishing often isn’t easy. July coincides with our highest water temperatures of the year and an abundance of natural food so the carp will often switch off boilies and onto naturals. Another one of my carp tips, if you can use them, particles are brilliant at this time of year. Particles were banned on burton mere so I just kept those glycerol based strawberry boilies going in, if the carp find your bait often you’ll keep catching so keep your bait going in.
Carp Fishing Tips, never underestimate floater fishing for carp
August
I only caught 8 carp in August. Again it’s those statistics, I was offered the chance to fish the syndicate lake in August, it didn’t have as many fish but they were a bigger average size for sure. Although August doesn’t look as good as the other summer months I caught a pb that month, a well known fully scaled mirror called ‘spike’ that later found fame when Rob Hughes and Simon Crow put the fish in Carpworld when they caught it as part of their day ticket carp fishing series. I was keeping the bait going into the main lake during this time and had I have fished it more I’m sure I’d have added a few more carp to the August tally.
Carp Fishing Tips, don't forsake your baiting, keep it going in
September
I bagged another 12 carp in September, that’s still 3 carp a session for the month despite the temps slowly starting to fall and the angling pressure of spring and summer really starting to bite. Although the runs kept coming the fishing was clearly past it’s peak and starting to slow down. During this month I just kept fishing and kept the bait going in, that was the most important thing and one of the most important things to consider during the year, you have to keep the bait going in, the carp will keep coming if you keep it going in. My home mades weren’t exactly a complete food source but they had enough fat content so they at least offered something although I knew I would need a change of flavour/base solvent for next year.
Carp Fishing Tips, carp fishing has past it's peak for the year
October
Another 10 carp came my way during October. As you can see there is a gradual slowdown in captures as we go through late summer and autumn towards winter. By now I’d stopped floater fishing and was concentrating on the boilie fishing. In mid October we had early frosts and I managed another PB in bitterly cold conditions, I remember the night well, it went down to minus 5 which was bitterly cold for October but I still caught 3 fish, one of which was the banana leather, a well known fish that eventually got moved into the syndicate lake, I caught the banana from there too one January afternoon and it became the last fish I caught before leaving the syndicate in early 1994. The banana weighed 16lb 13oz, one ounce heavier than spike the fully scaled I’d caught in August. Back then these were big fish for the Wirral area, in fact they still are to this day. Despite the cold air temperatures the water hadn’t ‘caught down’ yet and I caught well through October, a month that can often throw up a biggie and that’s another of my carp fishing tips, don’t give up too early before winter sets in.
Carp Fishing Tips, don't give up carp fishing too early
November
In November I had a very respectable 8 carp, most of them came early in the month before the cold weather chilled the water down and my results at this time reflect my winter carp fishing to this day, I fish up until the third week of November then I hang the carp rods up and go lure fishing. One thing you’ll notice in the graph is that there is no ‘feed up’ before winter, just a gradual decline in captures as we progress through autumn and into winter. I believe the ‘feed up’ is a fairy tale carp anglers tell themselves to keep going but I’ve never seen it in my results and I analyse them every year. If there was a feed up I think I’d see an increase in the number of carp caught in October or November but there never has been so there’s another useful carp tip, if anyone goes on about the feed up, treat what they say with a pinch of salt!.
Carp Fishing Tips, hang the rods up after the middle of November
December
Zero carp in December, it’s possibly the worst month of the year to go carp fishing. There seems to be a period when the carp completely switch off and it’s from mid November through until the end of December, it’s like the carp have an adjustment period to the lower water temperature and the shorter days. Even since 1992 I’ve always found December to be a poor month for carp fishing and this is why I put my carp rods away around the third week of November. I have had some success at Christmas time but not in this year so the last of my carp fishing tips is to leave December alone, try a bit of lure fishing, have some time off in the run up to the festive season and re-charge your batteries, that’s what I do and it works well for me.
Carp Fishing Tips, December is the worst month of the year for carp fishing
I hope you’ve enjoyed this look at my carp season of 1992, it was an epic season for me, I’ve only included carp over 5lb in weight, I actually ended up catching well over 250 carp in total but there were a lot of fish in the 3-4lb range that I ended up just putting back because they were too small to document and I was catching so many. To give my results some perspective, the person who caught the next most had 60 fish for the year so I was well out in front of everyone when it came to catches. I learned an awful lot from books like carp fever and from magazines like Carpworld and I took what I read and applied it to my own fishing, I’ve had good years since then, quite a few in fact but this was my best learning year and it set the foundations of my carp fishing life today, I hope you’ve enjoyed reading and/or watching this and I hope the carp fishing tips throughout this article and video help you on your way. Catching carp isn’t about x-bait or x-rig, it’s about location, setting traps, thinking outside the box and protecting your edges.
Keep your own secrets and be lucky.
Mark.
Peperami has been around for many years, as carp baits go this spicey and meaty flavoured snack is really good. Carp seem to like the taste of it and they are attracted to it in a big way so let’s take a look at peperami for carp fishing.
Peperami is available in most stores and shops, I tend to buy mine in the multi packs from the supermarket, bought as a bunch of 5’s I think they are cheaper than individual peperami sticks. One tip I have for buying Peperami from the supermarket is to wait until it’s discounted. Every now and again they mark peperami down to clear stock and when I see it at a discount I’ll pick up a bunch of 5’s. At the moment a bunch of 5’s is £2.75 so it’s not a cheap carp bait by any means.
A low double common carp taken on peperami with a small mesh bag of peperami chops
When carp fishing with Peperami I open up a stick and cut it into pieces with a pair of braid scissors. Chopping up a stick of peperami like this gives you a hookbait for your carp rig and a small handful of freebies which you can either throw in, mix with pellets or mesh up in some PVA Mesh. Peperami and pellets are a great combination for carp fishing but in winter I like to use just the peperami for my carp fishing.
Peperami for Carp Fishing, click below to watch
I put one piece of peperami on my carp hair rig, once the bait is held in place with a hair stop I start to trim the peperami with my braid scissors to remove most of the outer skin. I leave the skin underneath the peperami, where the hair enters the bait. Peperami skin is quite tough and by leaving it alone at the entry point, I lessen the risk of the hair cutting through the bait when playing a carp. If you can keep your peperami hookbait after catching a fish, you can re-use it without needed another piece for the hair rig.
With a trimmed down piece of peperami mounted on my carp hair rig I’ll either add a small pva mesh bag of chopped peperami or I’ll just fish it as a single hookbait. Remember it’s winter so you don’t want a lot of feed in your carp swim, you just want to try and ‘nick a bite’ and using peperami for carp is ideal for doing this.
Peperami carp bait clearly visible at the capture of this carp
Some carp anglers like to tip their peperami with foam so they have a bright colored ‘sighter’ for the carp to home in on and to add a little buoyancy to the hookbait. Be very wary of doing this, it works and works well but don’t critically balance your hookbait. Peperami is loaded with oil and oil is heavier than water. As the oil leaks out of your peperami and water replaces it, your peperami will get lighter. If you’ve critically balanced your bait so it sinks very slowly, you may find your bait floating once some of the oil has leaked out. Tip your peperami with a piece of Rig Foam by all means but make sure it sinks reasonably quickly rather than very slowly.
Rods are out and my peperami carp baits will catch fish today
Used as a single hookbait, peperami is very easy to use, it comes nice and neatly packed and it’s ideal for carp fishing, you can just keep a couple of sticks in your bait bucket or tackle box and it’s really convenient. Most people fish with boilies but it’s important to have a ‘change bait’ for scratching time when you’re struggling for bites and peperami is one of my favorites when I’m struggling. You may have your own ‘go to’ carp bait for those tough times but if you haven’t, you should consider trying peperami for carp fishing.
Video fish, 13lb 6oz taken using peperami for carp fishing
If you'd like some ideas to help you improve your own fishing please visit my YouTube Channel for access to tons of tips videos and ideas to help you level up your fishing.
Tight Lines
Mark.
